W610WUser Manual
29 / 136
Using Hands-free Speaker
To talk over hands-free speaker, user should press the hands-free button then dial the number, or dial the
number first then press the hands-free button. User can switch audio channel to the speaker from handset by
pressing the hands-free button when audio channel is opened in handset.
Using Headset
In the factory settings, after inserting headset, the headset channel is turned on by default. When the
headset is plugged in, the user can press the dial key to enter the number, and then press the dial key or "#"
key; Or enter the number first and then press the dial key. The number will be dialed out and a call will be
established through the headset channel. When the speaker is turned on, the user can switch the audio
channel of the phone by pressing the dial key.
7.3 Power on/off operation
Shutdown Operation
Hard shutdown: long press the red on-hook button
until shutdown.
Soft shutdown: long press the red on-hook button
to pop up the shutdown window, choose Yes to
shutdown.
Automatic shutdown when low battery: When the battery is about to run out, it will prompt "low battery".
The phone automatically shuts down when the battery runs out.
Reboot
Go to Menu > Basic > Reboot System, and select OK to confirm reboot.
Boot Operation
Press the red on-hook button until it turns on.
7.4 Connection Wi-Fi
Users can connect to Wi-Fi through the device or the web.
Device side
1. Enter [Menu] >> [WLAN], and enable the WLAN.
2. Select the Available Network and click to enter.
3. Select a Wi-Fi network from the Wi-Fi list, click Connect, and enter the password. You can choose whether
to show the password by selecting Hide and Display.
4. After clicking OK, the Wi-Fi connection will be successful, and the corresponding Wi-Fi will display
√
if the
network is available.
