87
8.5 Monitor
Click the [
Monitor
] icon
to enter the monitoring video interface, where you can see the
information of the bound video screen, and turn the page of the video by sliding left / right.
Note! The camera device added by scanning needs to turn on the ONVIF function!
8.5.1
Configure on the device side
The video information can be added, edited, modified and deleted on the device side.
Scan add
After the user enters the monitoring interface, click the search icon
in the upper right
corner, and the device will automatically search the camera device in the same network segment.
Click the searched device, fill in the user name and password of the device, and then click [
NEXT
] to
complete the addition of the device. When the user returns to the video interface, he can see the
picture information of the added monitoring device.
Picture 23 - Scanning monitoring equipment
