19
8.3 SIP Hotspot
SIP hotspot is a simple but practical function. With simple configurations, the SIP hotspot
function can implement group ringing. SIP accounts can be expanded.
Phone set functions as a SIP hotspot and other phone sets (B and C) function as SIP hotspot
clients. When somebody calls phone set A, phone sets A, B, and C all ring. When any phone set
answers the call, other phone sets stop ringing. The call can be answered by only one phone set.
When B or C initiates a call, the SIP number registered by phone set A is the calling number.
Picture 11 - Register SIP account
Table 7- SIP hotspot Parameters
Parameters
Description
Device Table
If your phone is set to “SIP hotspot server”, Device Table will display as Client
Device Table which connected to your phone.
If your phone is set to “SIP hotspot client”, Device Table will display as Server
Device Table which you can connect to.
SIP hotspot
Enable hotspot
Set it to be Enable to enable the feature.
Mode
Choose hotspot, phone will be a “SIP hotspot server”; Choose Client, phone will be a
“SIP hotspot Client”
Monitor Type
Either the Multicast or Broadcast is ok. If you want to limit the broadcast packets,
you’d better use broadcast. But, if client choose broadcast, the SIP hotspot phone
must be broadcast.
Monitor Address
The address of broadcast, hotspot server and hotspot client must be same.
Remote Port
Type the Remote port number.
