Fanvil i504 Series, User Manual, Page: 34 / 95

33
7 Open Door
The indoor station can operate the door access control system to open the door while in
standby mode or during a call.
7.1 Open The Door Under Standby
7.1.1
Open The Door Under Standby
In standby mode, users can click [Open Door] button on the desktop and then
select the corresponding door access control to open the door.
7.1.2
Settings Of Open The Door Under Standby
The steps to set up door opening in standby mode are as follows:

In the standby interface, click the
[Open Door]
button to enter the door
opening interface.

Click the [+] button on the door opening interface to enter the settings interface.

Enter the title, door access IP address, door access username, and door access
password (matching the door access web username and password); or enter the
title, open door URL, open door username, and password.

Click the button in the upper right corner, then a prompt saying "Configuration
completed" will appear, indicating that the configuration is finished. You can then
click the back button.
Note:
When using with compatible directional access control devices, you only need to input
the IP address, username, and password.
If using a third-party access control device, you need to input the complete URL for
opening the door, along with the username and password.