Fanvil i504 Series, User Manual, Page: 25 / 95

24
mode automatically disables upon the call's termination.
5.5.1
Mute The Call

Pressing the [mute] button during a call displays a blue mute icon on the
call interface.

Unmute the call:P
ress the device's mute button again on the call interface.
5.5.2
Ringing Mute

Turn on mute ringing: Go to [Menu] >> [Settings] >> [Basic] >> [Sound] : Swipe
left to adjust the ringtone volume, then tap [√] to save. Return to the standby
interface, where the device's upper right corner displays the silent mode icon .
When there's an incoming call, the device will display the incoming call interface but
won't ring.

To cancel the silent mode for incoming calls: Go to [Menu] >> [Settings] >>
[Basic] >> [Sound] : Swipe right to adjust the ringtone volume, then tap [√] to save.
After returning to the standby screen, the silent mode icon in the upper right corner
disappears.
5.6 Call Hold/Resume
During a call, users can press the
[Hold]
button to put the current call on hold. At
this point, the button will change to [Resume] , allowing users to press the [Resume]
button to resume the call.
5.7 Call Forward
Call forward is also known as ‘Call Divert’ which is to divert the incoming call to a specific
number based on the conditions and configurations. User can configure the call forward
settings of each line.