Fanvil i504 Series, User Manual, Page: 24 / 95

23
5.3 Reject The Call
5.3.1
Manually Reject
When receiving an incoming call, you can press the
[End]
button to reject the
call. The rejected call will be displayed in the missed call list in the call log.
5.3.2
DND
Users can activate the "Do Not Disturb" (DND) feature on the device to reject incoming
calls. This can be enabled by administrators through the web settings, or users can
activate it directly from the device.
DND can be configured by administrators through the web settings:
Log in to the device's web page, go to
[Device settings]
>>
[Features]
>>
[DND
settings] , Select line or phone to enable the DND function. You can also schedule DND
to automatically activate and deactivate at specific times. And then click [Apply] to
activate.
DND can be configured through the device menu
：

Tap [DND] on the right side of the device to enable the function. Then the
original icon will turn red, and the screen will display a prompt "DND ON" .

Go to [Menu] >> [Settings] >> [Call] >> [DND] , select the line/phone to enable the
DND function. You can also set a schedule to automatically activate and deactivate
DND at specific times. Then press the [√] button to save.
5.4 End The Call
After the user finishes the call, end the call by pressing the [End] button .
5.5 Mute
Users can enable mute mode during a call, which disables the device's microphone,
preventing the local sound from being transmitted to the other party. Typically, mute