9
6.3 SIP Configurations
At least one SIP line should be configured properly to enable the telephony service. The line
configuration is like a virtualized SIM card. Just like a SIM card on a mobile phone, it stores the service
provider and the account information used for registration and authentication. When the device is
applied with the configuration, it will register the device to the service provider with the server’s
address and user’s authentication as stored in the configurations.
The SIP line configuration should be set via the WEB configuration page by entering the correct
information such as phone number, authentication name/password, SIP server address, server port,
etc. which are provided by the SIP server administrator.
WEB interface
：
After login into the phone page, enter [
Line
] >> [
SIP
] and select
SIP1/SIP2
for
configuration, click apply to complete registration after configuration, as shown below:
Figure 4 - SIP Registration
