8
6 User Getting Started
6.1 Quick setting
Before proceeding with this step, please confirm that your Internet broadband connection can work
normally and complete the connection of the network hardware. The default network mode of this
product when it leaves the factory is fixed IP address mode, and the default is 192.168.1.128.
Long press the speed dial button for 10 seconds , wait for the horn to beep quickly, and then press
the volume up button three times quickly to stop the beeping. Wait for 10 seconds, the system will
automatically announce the IP address by voice after successfully switching to the dynamic IP
acquisition. Switching again will become a fixed IP address.
Log in to the WEB page of the device to configure according to the IP address;
Configure the account, user name, server address and other required parameters for registration on
the SIP page;
Figure 2 - Quickly setting
6.2 WEB configuration
When the device and your computer are successfully connected to the network, enter the IP address of
the device on the browser as http://xxx.xxx.xxx.xxx/ and you can see the login interface of the web page
management.
Figure 3 - WEB Login
The username and password should be correct to log in to the web page.
The default username and
password are "admin"
. For the specific details of the operation of the web page, please refer to
9
Web Configurations
