Fanvil FH-S01, User Manual, Page: 50 / 63

45
9.19
Intercom Setting >> MCAST
It is easy and convenient to use multicast function to send notice to each member of the
multicast via setting the multicast key on the device and sending multicast RTP stream to
pre-configured multicast address. By configuring monitoring multicast address on the device,
monitor and play the RTP stream which sent by the multicast address.
The detail for 8.2 MCAST
9.20
Intercom Setting >> Action URL
Note! The operation URL is used for the IPPBX system to submit device events.
Action URL setting:
configure the URL to report actions to the server. For example, fill in the
URL: http://InternalServer /FileName.xml? (InternalServer is the IP address of the server, and
FileName is the XML file name of the action reported by the storage device)
picture 35 - Action URL