Fanvil FH-S01, User Manual

Page: 26 / 63

21
Firmware Upgrade
：
Firmware online upgrade means that the device sends an HTTP request to the server, and the
server returns the corresponding description file or 404 or timeout. After receiving it, the device
parses the version description file and prompts the user whether to upgrade the new version
Picture 17 - Online upgrade settings
Table 6 - Firmware upgrade
Parameter Description
Upgrade server
Enable Auto Upgrade
Enable automatic upgrade, If there is a new version txt and new
software firmware on the server, phone will show a prompt
upgrade message after Update Interval.
Upgrade Server Address1 Set available upgrade server address.
Upgrade Server Address2 Set available upgrade server address.
Update Interval
Set Update Interval.
Firmware Information
Current Software Version It will show Current Software Version.
Server Firmware Version It will show Server Firmware Version.
[Upgrade] button
If there is a new version txt and new software firmware on the
server, the page will display version information and upgrade
button will become available; Click [Upgrade] button to upgrade
the new firmware.
New version description
information
When there is a corresponding TXT file and version on the server
side, the TXT and version information will be displayed under the
new version description information.
 设备向服务器请求的文件为 TXT 文件，文件名称为 vendor_model_hw1_0.txt。hw 后面是硬件
版本号。文件名中有空格全部改为下划线。

The file requested from the server is a TXT file called vendor_model_hw10.txt.hw followed
by the hardware version number, it will be written as hw10 if no difference on hardware. All