Use and maintenance manual for fixed or folding corn harvesting header
EDITION 01/2016
40
Lubrication of main transmission
joints supports (folding version)
Grease by means of the special
greaser shown in the figure.
Grease to be used: multifunctional
lithium.
Greasing the drive shafts
The header can be equipped with one,
two or more PTO drive shafts or
universal joints that have to be
regularly greased. For use and
maintenance refer to the producer
manuals.
Row Units - Transmission
Row units box with / without stalk
chopper
The transmission box of the harvesting
row units works with lubricant oil. It can
be equipped with a stalk chopper by
means of an additional built-in box.
This box works with separate grease
lubrication.
Periodically check to makes sure that
there are no oil leaks and that the
gearbox reaches the planned oil level
during the idle phase.
Tightening plugs and screws:
-
Tightening the countersunk screws of
the cover: 7÷9 daNm.
-
Tightening the stalk chopper screws:
8.5÷10.9 daNm.
