RIL-150
RIL-200
INSTALLATION & MAINTENANCE
INSTRUCTIONS
,Q/LQH
'XFW0RXQWHG)DQ
RIL-100RIL-125
Page 1: ...RIL 150 RIL 200 INSTALLATION MAINTENANCE INSTRUCTIONS Q LQH XFW 0RXQWHG DQ RIL 100 RIL 125 ...
Page 2: ...on and Maintenance Instructions are fully adhered to 1 2 All electrical installations must be carried out by a suitably qualified and competent personnel in accordance with all statutory requirements 1 3 The fan is designed for use in an ambient temperature of up to 40 C It is not suitable for corrosive or explosive atmospheres 1 4 The installer should provide easy access to the fan to facilitate ...
Page 3: ...A minimum of one 1 metre of duct is to be fitted to the fan inlet and discharge spigots 1 8 To avoid a hazard a damaged supply cord must be replaced by the manufacturer Installation Warning The fan must be isolated from the power supply during installation and maintenance 2 1 Upon receipt the fan should be inspected for any damage 2 2 Check the details on the rating plate to ensure that the correc...
Page 4: ......