Fantech FKD 8XL Installation And Maintenance Instructions Download Page 1

INSTALLATION AND  MAINTENANCE
INSTRUCTIONS FOR MODEL FKD

1. The compactness and adaptability of the FKD Series fans permit

easy installation.The fans are shipped fully assembled and can be
mounted at any angle. For various mounting, see figures on the 
following page.

2. Because this unit has rotating parts, safety precautions should 

be exercised during all phases of installation, operation and 
maintenance.

3. CAUTION: “For General Ventilation Use Only. Do Not Use To

Exhaust Hazardous Or Explosive Material and Vapors.”

4. Remove unit from package and inspect within 15 days after 

receipt. If damaged, report damage to carrier. Do Not operate 
this unit with visible damage to the blower or impeller 
assembly.

5. CAUTION: “This unit has an unguarded impeller. Do not use 

in locations readily accessible to people or animals.” WEAR
HAND PROTECTION AND STAY CLEAR OF SHARP 
EDGES!

6. Screen guards must be installed within reach of personnel,

within (7) feet of the working area, or when advisable for safety.

7. PLEASE read the entire manual before installing.

WARNING

Before installation, servicing or cleaning unit, switch power off at serv-
ice panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.

Fan Tech at

kitchen

::

accessories

U      N      L      I      M      I      T      E      D

INSTALLATION AND  MAINTENANCE
INSTRUCTIONS FOR MODEL FKD

1. The compactness and adaptability of the FKD Series fans permit

easy installation.The fans are shipped fully assembled and can be
mounted at any angle. For various mounting, see figures on the 
following page.

2. Because this unit has rotating parts, safety precautions should 

be exercised during all phases of installation, operation and 
maintenance.

3. CAUTION: “For General Ventilation Use Only. Do Not Use To

Exhaust Hazardous Or Explosive Material and Vapors.”

4. Remove unit from package and inspect within 15 days after 

receipt. If damaged, report damage to carrier. Do Not operate 
this unit with visible damage to the blower or impeller 
assembly.

5. CAUTION: “This unit has an unguarded impeller. Do not use 

in locations readily accessible to people or animals.” WEAR
HAND PROTECTION AND STAY CLEAR OF SHARP 
EDGES!

6. Screen guards must be installed within reach of personnel,

within (7) feet of the working area, or when advisable for safety.

7. PLEASE read the entire manual before installing.

WARNING

Before installation, servicing or cleaning unit, switch power off at serv-
ice panel and lock the service disconnecting means to prevent power
from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.

Call 1-800-667-8721 anywhere in the US and Canada

-

www.

rangehoods

.com

Summary of Contents for FKD 8XL

Page 1: ...device such as a tag to the service panel Fan Tech at kitchen accessories U N L I M I T E D INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR MODEL FKD 1 The compactness and adaptability of the FKD Series fans permit easy installation The fans are shipped fully assembled and can be mounted at any angle For various mounting see figures on the following page 2 Because this unit has rotating parts safety...

Page 2: ...t Detail Please follow all applicable codes when installing this unit 1 Install wood supports to structure for fan mounting 2 If equipping with vibration mounts attach to supports 3 Attach fan to vibration mounts be sure not to overtighten the neoprene element 4 If equipping fan with isolators FC Clamps they should be attached at this time 5 See wiring section to complete installation Mounting Ill...

Page 3: ... will not be affected 230 Volt Three Phase Fan Notes 1 Contactor should be used Control coil should be wired in series with motor thermal contacts TK leads as shown in diagram to provide thermal motor protection 2 All leads are color coded as well as identified with a band containing an Alpha Alpha or Alpha Numeric code i e TK or Z2 Colors should be verified against code band If code band and colo...

Page 4: ...st be clearly marked on outside of carton or delivery will be refused All product s must be returned freight prepaid 3 Product s will be repaired replaced and shipped back to buyer no credit will be issued 4 Any out of warranty product will be evaluated and buyer will be notified of cost repair cost will be charged to cus tomer buyer will be responsible for return freight or prod uct may be return...

Reviews: