1.4.6 Power connection
(1) Follow the picture and connect the AC adaptor to the player’s DC IN jack;
(2) Follow the picture and plug in the AC adaptor to the power outlet.
1.5 First Time Usage
1. Hard disk format
At first you must format the hard disk of the P2300 at a PC. Format your HDD in NTFS or in
FAT32 with a FAT32 format tool, like Swissknife or EASEUS Partition Master.
2. Power on
After connected to power, the indicator of the POWER LED on the front panel will turn on (red
light). When push the POWER button on the remote control will power on the player. During
startup, the indicator light is flashing blue, after the player is ready, the indictor will stay blue.
3. Power off
To power off the unit, press the POWER button on the remote control. When power off the
player, it will prompt you that the system is shutting down. After the system is shut down, the
indicator light of the POWER button on the front panel will turn red.
4. Language control
The system language of this player can be set to English or other languages. In setup interface,
the selected language will take effect immediately.
EN 11 / 28
