ENGLISH
12 / 57
1.6 First steps
At the time if you connect the player to the TV, you can make following settings:
Menu Language, Time, Wired Lan Setup, Screen Size
Note:
You can adjust these settings any time, in
under the setup menu.
1.7 HDD Format
For users who wish to install a new SATA HDD into the player, at first you have to format the
hard disk. Please refer to the following procedures to format the hard disk.
-
Step 1: Go in the Setup menu under System can you format the HDD
-
Step 2 Select the HDD and on the
Warning
page, press
OK
to confirm.
-
Step 3: Select
Format
, press
OK
, and then hard disk format will start.
The formatting procedure will be finished within a few minutes. And then you can use the hard
disk properly on the player.
Note
: HDD format will remove all data stored on the hard disk drive. Please take care and
backup your data in advance!
Summary of Contents for 3DFHDL
Page 1: ...ENGLISH ...
