Fanstel ST218B Page 10 Owner'S Manual Download

Page: 10 / 27

Page 7

Adjusting Headset Receiver Volume

If you wish to use a headset with this telephone, get one with the 2.5mm or the RJ22 plug.
We recommend a headset without built-in amplifier. Amplifier for adjusting headset
receiver volume is built into this telephone.
1. Press

the

Headset

button and listen to the dial tone.

2. Press the right side of the

Volume

button to increase the receiver volume.

3. Press the left side of the

Volume

button to decrease the receiver volume.

4. Press

the

Headset

button or the

Goodbye

button when the desired receiver

volume is reached.

Adjusting Speakerphone Receiver Volume

To adjust the speakerphone receiver volume:
1. Press

the

Speaker

button and listen to the dial tone.

2. Press the right side of the

Volume

button to increase the receiver volume.

3. Press the left side of the

Volume

button to decrease the receiver volume.

4. Press

the

Speaker

button or the

Goodbye

button when the desired receiver volume

is reached.

Amplify or Volume Reset Override

If you set the

Amplify

switch on the back of phone to

, volume reset feature is

disabled. Handset and headset receiver volume level is the same as that of last call.

If the

Amplify

switch is set to

Off

, handset and headset receiver volume level is reset

when phone is on-hook.

Warning:

Possible loud receiver volume when the

Amplify

switch is set to

and the

Amplify

LED is lit.

Summary of Contents for ST218B




























Search results

Summary of Contents for ST218B

Reviews:

Related manuals for ST218B

Brands by name

Popular brands

Fanstel ST218B, Owner'S Manual

Search results

Summary of Contents for ST218B

Reviews:

Related manuals for ST218B

Brands by name

Popular brands