FANOX SIL-V, User Manual, Page: 98 / 212

www.fanox.com Rev.10 98/212
7.6.3. Accessing the menus
The keys ▲, ▼, ◄ and ► are used to navigate through the different options and menus.
The “
OK
” key is used to accept and to enter and menu or an option. The “
C
” key is used to
move up through the menu levels.
It is not necessary to enter any password to read or view the parameters, measurements
or settings…
A 4-character password must be entered in order to modify any parameter.
After returning to the main screen, the password must be entered again to make any
further modifications.
The keys ◄ and ► are used to navigate from one item to another within a parameter. The
keys ▲ and ▼ are used to increase or decrease the value. If an invalid value is entered
during the process, the “
C
” key can be used to delete it.
The navigation through the menus is described as graphically as possible below.
7.6.4. Date-Time Menu
The date-
time menu can be accessed by pressing the “►” key from the standby mode
screen. From here, press the “OK” key to access the date-time modification screen. Use
the “►” and “◄” keys to position the cursor over the digit that you want to change, and
assign a value to this digit using the “▲” and “▼” keys. Once the date-time has been
entered, press “OK” to change the equipment date. Press the “C” key to return to the
standby mode screen.
The date-
time information can be viewed by pressing the “►” key from the main screen.
DATE AND TIME
07/04/2015 11:43:25
C
SILV000C0A12BA
0.00 0.00 0.00 0.00
OK
↓
07/04/2015 11:43
C