FANOX SIL-V, User Manual, Page: 83 / 212

www.fanox.com Rev.10 83/212
The following key sequence is used to gain access to the test menu: from the main menu,
press the keys “◄”, “▼”, and “►” in sequence and then press and hold the "OK" key until
the "Test menu" appears on the display. The test menu is accessed by pressing the "OK"
key again, and the “▲” and “▼” keys can be used to navigate through the different menu
items. Each item can be activated or deactivated by pressing "OK" on it (if the item is
deactivated, it is activated by pressing OK; if the item is activated, it is deactivated by
pressing “OK”). Press the “C” key to exit the test menu.
The inputs check can be seen in the conditions menu.
To obtain more detailed information, the method for navigating the menus is explained
graphically in the keypad and display section.
5.16. Power supply
The equipment power consumption is less than 4 watts.
The supply guarantees between ±20% of the auxiliary voltage. Outside this range the relay
could operate, but this is not guaranteed. It is used a power supply of 24-220 Vdc/48-230
Vac.
Supply from the front is designed for fine tuning, or situations where the auxiliary voltage is
not guaranteed. In these cases, complete relay operation is not guaranteed, particularly
regarding outputs.