FANOX SIL-D00, User Manual, Page: 98 / 226

www.fanox.com Rev.06 98/226
7.3. LCD and keypad
The front of the SIL A relay is fitted with an alphanumeric LCD screen, measuring 20x2.
This screen provides the user with access to read information about the settings
parameters, measurements, status and events. All of this information is arranged in a
system of menus.
A keypad is fitted to the relay front panel, which can be used to access the information
shown on the LCD screen and to navigate through the menu system.
This membrane keyboard has 6 keys that can be used to navigate through the different
menus and to change the setting parameters. The ▲ ▼ and ◄ ► keys can be used to
navigate through the different menus, the different options in each menu and the different
values for the settings parameters.
The “
OK
” key is used to access the menus and the different options, as well as to approve
changes to values. The “
C
” key is used to delete and to go back through the menu levels.
As well as the 6 keys, there is also a " Reset
" key. When “
Reset
” is pressed, the leds
indicators return to their initial position. The “
Reset
” key can also be used to delete all of
the events in the "Events" menu.
This is equipped with a specific key marked with 79, which permits operation on the
recloser, locking and unlocking it.
It is also equipped with a specific key marked with 52, which permits operation on the
circuit breaker, opening and closing it.
7.4. SICom Communications program
The SIcom program, which works with the Windows 7, Windows 8 and Windows 8.1 and
WINDOWS 10 operating systems is provided, and can be used to gain access to all of the
equipment information, to modify the settings and to save events using a graphic user
interface.
The following operations can be carried out using the SIcom program:
•
Status reading
•
Measurement reading
•
Reading and changing settings
•
Reading and changing configuration
•
Reading and deleting events
•
Changing the user passwords
•
Loading settings files
•
Loading configuration files
•
Date-time synchronisation
•
Checking the versions of the equipment
•
Configuring the Modbus address
•
Configuring and checking the demand