EN_FANOXTD_GUIDE_SIL_OCEFPrimaryDist_SILA_R002.doc 29 / 36
7.3.8. Fault reports menu
How to delete the fault reports
From the standby mode screen,
press the “OK” key to
access the first line of
menus. Use the “▲” and “▼” keys
to position the curs
or over the “FAULT REPORT” screen.
Press "OK" and use the “▲” and “▼” keys to position the
cursor over the faults.
Once it is accessed to a fault report, pre
ss “OK”, to
visualize the cause which has originated the fault report.
Pressing “OK” again it is accessed to the registered
events that are related with that fault report. The first
event is the activation of the fault report. To visualize the
rest events
use “▼” key.
To delete the fault reports from the relay it is necessary to
insert the password 5555 from the fault report menu.