Rev.04
55/112
6
SETTINGS GROUPS
SIL-A is provided with four settings groups. The settings group which is active at a specific moment can
be modified in two ways:
•
Changing the active Settings group. In the general settings, inside the general menu, there is a
setting which establishes which settings group is active.
•
By means of two inputs. Four possibilities are defined.
00
This situation is defined by the active settings group.
01
Settings group 1
10
Settings group 2
11
Settings group 3
In the zero position the active item is defined by the active settings group defined in the general menu.
Regarding other options, regardless of that established by the settings, the inputs prevail over the
settings.
If the use of both inputs is not required, then one can be used, but depending on which is used, operation
can be done with Settings group 1 or Settings group 2.
Settings group 4 can be used just from the active settings group defined in the general menu.
7
AVALIABLE CURVES
7.1 IEC 60255-151 Curves
The SILA relay complies with the curves shown in standard IEC60255-151:
•
Inverse Curve
•
Very Inverse Curve
•
Extremely Inverse Curve
•
Long time inverse
•
Short Time Inverse
Summary of Contents for SIL-A A Series
