FANOX SIL-A A Series, User Manual

Page: 52 / 112

www.fanox.com Rev.04 52/112
5.3 LDP
Function Description Minimum Maximum Step Unit Default
LDP
Current Level 0.01 1 0.001 I nominal 0.4
Interval Time 1 60 1 min 1
5.4 General
Function Description Minimum Maximum Step Unit Default
General settings
Identification - - - - my IED
Serial Number - - - - (*)
Language - - - - English
Settings Group 1 4 1 - 1
(*) Serial number is a read-only setting.
Identification: It is an ASCII text used to identify the equipment. Protection devices are normally
associated with a specific line or position, and this setting is used for said identification. It is important to
fill this field in correctly, as the events and oscillography data is accompanied by this information. This
setting can only be adjusted through communications.
Language. The SIL device has the capacity to display messages in four languages, one of which is
English in all of them. Please see the list of models to find out about available languages.
Active Settings Group. The Settings groups used by default can be selected with this parameter.
5.5 Inputs
Function Description Minimum Maximum Step Unit Default
Inputs
Debounce time 5 128 1 ms 5 ms
5.6 USB communication
Function Description Minimum Maximum Step Unit Default
USB Communications
Slave Address 1 247 1 - 1