Rev.17
75/119
7.7.3. Date-time menu
The date-
time menu can be accessed by pressing the “►” key from the standby mode screen.
From here, press the “OK” key to access the date-time modification screen. Use the “►” and “◄”
keys to position the cursor over the digit that you want to change, and assign a value to this digit
using the “▲” and “▼” keys. Once the date-time has been entered, press “OK” to change the
device
date. Press the “C” key to return to the standby mode screen.
The date-
time information can be viewed by pressing the “►” key from the main screen.
►
DATE AND TIME
01/01/2000 01:43:25
C
SIAF550BC110AA
0.00 0.00 0.00 0.00
OK
↓
01/01/2000 01:43
C
7.7.4. Versions
The device versions menu can be accessed from the standby mode screen by pressing the keys
“▲”. This displays the software versions of the relay processors. Press the “C” key to return to the
standby mode screen.
▲
hold
Vers: COMDSP PIC
1.20 1.01
C
SIAF550BC110AA
0.00 0.00 0.00 0.00
7.7.5. Communication parameters
The communications parameters can be viewed holding down the “▼” key from the standby mode
screen.
▼
hold
LOCAL Settings
1 19200-8-N-1
C
SIAF550BC110AA
0.00 0.00 0.00 0.00
▼
REMOTE Settings
2 19200-8-N-1
Summary of Contents for SIA-F
