ISO 9001:2008
www.fanox.com
SIAC116B1011AB_Rev. 05
19 / 32
7.3.2. States menu
7.3.3. Settings menu
From the standby mode screen, press the “OK”
key to access the first line of menus.
Use the “▲” and “▼” keys to position the cursor
over the “SETTINGS” screen and press “OK”. This
takes you to t
he settings groups’ line.
Use the “▲” and “▼” keys to position the cursor
over a settings group, and press the “OK” key to
access the settings that belong to this group.
Use the “▲” and “▼” keys to move through the
different settings. The information that appears
underneath the setting name is its value.
States menu indicates the stuses of the relay
(activated or deactivated) at real time.
From the standby mode screen, press the
“OK”
key to access the first line of menus.
Use the “▲” and “▼” keys to position the cursor
over the “STATES” screen and press “OK”. This
takes you to the status groups’ line.
Move the cursor over a group of statuses, and
press the “OK” key to access the statuses that
belong to this group. Use the
“▲” and “▼” keys to
browse through the different statuses.
The information shows whether or not each status
is active. The message “>Activated” appears
under the name of the group in the status group
menus if any of the statuses in that group are
active.
Press the “C” key to return to the standby mode
screen.
