FANOX SIA B, User Manual

Page: 55 / 99

www.fanox.com Rev. 06 55/99
8.3. LCD and keypad
The front of the SIA-B relay is fitted with an alphanumeric LCD screen, measuring 20x2. This
screen provides the user with access to read information about the settings parameters,
measurements, state and events. All of this information is arranged in a system of menus.
A keypad is fitted to the relay front panel, which can be used to access the information shown on
the LCD screen and to navigate through the menu system.
This membrane keyboard has 6 keys that can be used to navigate through the different menus and
to change the setting parameters. The ▲ ▼ and ◄ ► keys can be used to navigate through the
different menus, the different options in each menu and the different values for the settings
parameters.
The “
OK
” key is used to access the menus and the different options, as well as to approve
changes to values. The “
C
” key is used to delete and to go back through the menu levels.
As well as the 6 keys, there is also a " Reset
" key. When “
Reset
” is pressed, the alarm led and the
trip led
return to their initial position. The “
Reset
” key can also be used to delete all of the events in
the "Events" menu.
8.4. SICom Communications program
The SIcom program, which works with the Windows® 2000/XP, Windows 7 and Windows 8
operating systems is provided, and can be used to gain access to all of the equipment
information, to modify the settings and to save events using a graphic user interface.
The following operations can be carried out using the SIcom program:

Status reading

Measurement reading

Reading and changing settings

Reading and changing configuration

Reading and deleting events

Changing the user passwords

Loading settings files

Loading configuration files

Date-time synchronization

Checking the versions of the equipment

Configuring the Modbus address

Configuring and checking the demand