www.fanox.com
Installation_Guide_SIAB000B0010AA_Rev. 03 8 / 32
2. USER INTERFACE
2.1. Relay front part
2.2. Bistable magnetic indicator (Flag)
The front panel is equipped with 1 bistable magnetic indicator which indicates the general trip.
The indicator remains in position even when the equipment loses power, so that the
maintenance service can see the trip even through the equipment is not powered.
Once it has been activated, it is necessary to manually reset it by pressing the “RESET” button.
The operation of the magnetic indicator can be checked from the test menu.
1 bistable
Magnetic Indicator “trip”
There is a general trip without indicating the reason.
2.3. LED indicators
The SIA-B front panel has two not configurable LEDs. By default, they show: ready (LED ON)
and alarm (LED ALARM).
LED ON
Activated (Green LED blinking) if the relay is ready
LED ALARM
Activated (Red LED blinking) if an alarm occurs.
2.4. How to install SICOMM software
To install the SICom it is necessary the following link:
http://fanox.blob.core.windows.net/sicom/publish.htm
The lin
k will open the next screen, where key “install” must be pressed:
The necessary drivers depending on the
operative system can be downloaded from
this page. The update of the software
does not require any user´s action, this is,
if the computer is connected to Internet,
SICom updates itself when it is started.