www.fanox.com
Installation_Guide_SIAB110FC232AC_Rev. 01
21 / 36
7.3. Menus
7.3.1. Measurements menu
The information in SIA-B relay is organized through the
following menus:
Measurements
States
Settings
Events
Counters
Command
LDP
Fault Report
From
standby screen press “OK” key to access to the fist
menu “MEASUREMENTS” and press “▼” key to overview
the rest of the menus in the relay
To return to standby screen, press “C” key.
It is also possible to access to Fault reports by pressi
ng “◄”
key.
Fro
m the standby mode screen, press the “OK” key to
access the first line of menus.
Use the “▲” and “▼” keys to position the cursor over the
“MEASUREMENTS” screen and press “OK”.
Use the “▲” and “▼” keys to position the cursor over the
measurement and to see its value.
Press the “C” key to return to the standby mode screen.
