Cement Curing Autoclave User Manual
100072577
Revision H
9
Figure 3-5
Cement Mold Base
3.3
Cement Curing Autoclave Controls and Indicators
The main power switch illuminates when electric power is applied to the
cement curing autoclave circuits.
The heat switch, located below the main power switch on the front panel,
enables and disables the heater circuit without interrupting power to the entire
instrument.
The temperature controller regulates the power applied to the heater circuit to
achieve and maintain the desired temperature inside the curing chamber. It
constantly compares the desired temperature (set point) to the temperature
reading from the curing chamber thermocouple and adjusts the heating cycle
to achieve and/or maintain the desired temperature. It continuously displays
the current and set point temperatures.
