How to Wire Your Ceiling Fan
WARNING
To avoid possible
ſ
re or shock, be sure electricity is
turned off at the main fuse box before wiring.
(Figure 1)
Figure 1
MAIN FUSE BOX
This ceiling fan must be installed by a licensed electrician.
ʆ
WARNING
Figure 2
8
Terminal Block
(on Hanger Bracket)
Supply Cable
Grn/Yel Wire
(Earth) from Hanger Bracket
Grn/Yel Wire
(Earth) from Fan
Blue Wire
(Neutral)
Brown Wire
(Motor Active)
Red Wire
(Active)
Black Wire
(Neutral)
Grn/Yel Wire
(Earth)
N
L1
L
Hanger Ball
1.
Securely connect the green/yellow earth wires from
the hanger ball and the hanger bracket and the supply
green/yellow earth wire to the terminal block as shown
in Figure 2.
2.
Securely connect the blue fan motor wire and the
black supply neutral to the “N” terminal of the connec-
tor block as shown in Figure 2.
3.
Securely connect the brown fan motor wire and the
red (Active) supply wire to the “L” terminal of the
connector block as shown in Figure 2. After
connections have been made, carefully push leads
into the recess making sure there is separation
between connectors.
Check to see that all connections are tight, including
earth, and that no bare wire is visible at the wire
connectors, except for the earth wire. Do not operate
fan until the blades are in place. Noise and motor
damage could result.
IMPORTANT
Fan installation must be completed, including the
installation of the fan blades, before testing of the
controls.
