9
Installing the Canopy Housing
Figure 1
3.
Securely attach plugs from motor to sockets on Downlight
Support Plate Assembly (Figure 3)
Installing the Light Kit Assembly
1.
Loosen three screws and remove one screw from
support flange. (Figure 1).
Figure 2
Figure 3
2.
Securely attach the Adapter Plate to the Support bracket
and tightening three screws. (Figure 2)
CAUTION
To avoid possible electrical shock, be sure electricity is
turned off before installing downlight assembly.
Figure 1a
Figure 1b
NOTE:
This step is applicable
after
the necessary wiring
is completed.
▲
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy housing
and not pinched between the housing and the ceiling.
1.
Loosen the two shoulder screws in the Hanger
Bracket.
2.
Securely attach the Canopy Housing over the shoulder
screws (Figure 1a).
3.
Securely attach and tighten the Canopy Screw Cover
over the shoulder screws in the Hanger Bracket utilizing
the keyslot twist-lock feature (Figure 1b).
