Hanging the Fan
7
Figure 9
Floor
Ceiling
No
less than
7 ft
35˝ long x 16½˝ wide
53˝ long x 34½˝ wide (w/light kits & shades)
18˝
NOTE: Prior to hanging your fan, set the frequency
switches located on the receiver unit in the control box
See pages 5 or 6.
1.
Your fan is supplied with the following hanger items:
a. Two 80˝ pieces of chain
b. Four “S” hooks
c. Four 8˝ Hanger Rods
2.
Attach the fan to the hanger system (which is already
attached to the ceiling) by using any combination of the
above items (Hanger Rods only; “S” Hooks and Chains
only; or a combination of Hanger Rods with the “S” Hooks
and chains)
Please choose one of two hanger options for your ceiling
fan:
Option 1 - Hanger Canopy Mount (Figure 8a)
1.
Place the Hanger Canopy Assembly on the ceiling
covering the junction box.
2.
Attach the assembly to the ceiling using two 5˝ Lag Bolts.
Choose any 2 opposing holes in the canopy assembly
which will allow the Lag Bolts to screw in into the wood
structure of the building.
3.
Proceed to “Hanging the Fan”.
Option 2 - Hanger Eye Bolt Mount (Figure 8b)
1.
Hanger Eye Bolts to be attached to the ceiling 30 inches
apart. Each Eye Bolt should be 15 inches away from the
desired center of the fan location.
2.
Drill a ¼˝ pilot hole for each Eye Bolt.
3.
Screw the Eye Bolt into the wood structure of the
ceiling.
3.
Proceed to “Hanging the Fan”.
Hanger Options
Figure 8b
Figure 8a
▲
WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades (Figure 9)
INSTALLATION NOTE
HEAVY! Two or three people are required to hang the
fan.
Summary of Contents for Evanesce FP2700 Series
Page 15: ......
