24
- DC 12V charging : Using the included adaptor, remove the rubber
plug, plug the cable into the DC 12V input of the device and plug into
the power outlet. The charge indicator lights red during charging.
- Solar charging: Using the solar panel, simply orient the lantern so
that the solar panel is facing the sun's rays. The charge indicator
lights red during charging.
Once the battery is fully charged, the charge indicator turns green.
Then disconnect the DC power cord and put back the rubber plug.
Your device is ready to use.
When the battery is discharged below the limit level, the device turns
off to protect the battery life. Then recharge the device.
The device may heat up slightly during charging. Do not use the
device while charging, the light switch must be set to OFF (O).
With overcharge protection function. Charging time : 20-24 hours.
6. HOW TO OPERATE
WARNING : Before using your appliance, carefully read the
safety instructions in this manual.
Turn the light switch clockwise to turn on the lantern
and increase the brightness of the LED (+). Turn
counterclockwise to decrease the brightness and turn
off the lantern (O).
If not used, turn the light switch off and disconnect the appliance
from the AC power.
This lantern only works on battery and not on AC power.
This lantern has an automatic ignition function.
If the lantern is connected to the AC power with the light switch
turned on, the LED will not light up and the battery will recharge fully.
When the battery is fully charged, the charge indicator will turn
Summary of Contents for KN-6864LS
Page 28: ...28 www fanelite com ...
