Page:7/18
7
value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by one hour.
3:
Sleep Mode:
Press this Key to turn on the sleep mode, then the unit will work on Energy-Saving and quiet type.
Note:
1. Can not turn on the sleep mode in the dehumidifying or Fan mode!
2. The waterfull Lamp will turn on and buzzer will alarm for several second, the compressor will stop to
work when the inner unit chassis water is full.
2. Operation instructions of remote control
1) The remote control Panel is as follows:
Instructions of key operation of the high-quality remote control are as follows:
1. Power: Press
the key to turn on or turn off the machine.
2. Timer: press
the key to set timing.
3. Down: press
the key to reduce temperature and timing set value.
4. Mode: press
the key to switch between cooling, dehumidifying, fan, heating mode.
5. Up: press
the key to increase temperature and timing set value.
6. Fan: press
the key to select high, low wind speed.
7. Sleep Mode: Press
the key to turn on the sleep mode.
IV. Protection function
3.1
、
Frost Protection Function:
In cooling, dehumidifying or economic power saving mode, if the temperature of the exhaust pipe
is too low, the machine will automatically enter protection status; if the temperature of the exhaust
pipe rises to a certain temperature, it can automatically revert to normal operation.
3.2
、
Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will automatically sound an
alarm, and the "FULL" indicator light will flash. At this point, you need to move the drainage pipe
connecting the machine or the water outlet to sewer or other drainage area to empty the water
(details see
Drainage Instruction
s at the end of this chapter). After the water is emptied, the
