Hardware Documentation armStone
™A9
| 9 of 26
4.6
LVDS Connectors
4.6.1 F&S JAE FI-S25P connector on top side
The single channel LVDS display port on top side can be direct connected to a LVDS 18 or
24 bit display.
The VLCD voltage is 3.3V and switched on the baseboard. The current limit is 1.2 A.
Connector is a JAE FI-S25P-HFE. Matching connector on display cable is a crimp connector
FI-S25S housing and a cable with FI-C3-A1-15000 crimp contacts.
This connector is used because a wide range of displays does have a JAE FI-S series
connector (with different pinouts) and it's easy to handle identical crimp contacts for the cable
manufacturer.
LCD FI-S25S Connector
Pin
Function
1,2,23
VLCD (3.3V switched, max. 300mA)
3,4,7,10,13,16,19..22 GND
14
LVDS0_CLK-
15
LV
5
LVDS0_DATA0-
6
LVDS
8
LVDS0_DATA1-
9
LVDS
11
LVDS0_DATA2-
12
LVDS
17
LVDS0_DATA3-
18
LVDS
24
Backlight on (3.3V high active CMOS logic)
25
Backlight PWM (3.3V level CMOS logic)
Table 2: Single channel LVDS connector
Pin 1 is marked on the connector with an arrow and also marked on PCB.
The single channel LVDS port can be direct connected to a LVDS 18 bit display.
Unused signals should be left unconnected.