background image

RS-P4

Remote control transmitter,

4-button remote

Electronic relays are used for radio remote control of gates, shutters, li-

ghting, arming alarm systems, etc. The remote control system consisting 

of a transmitter (remote) and receiver (relay). There is a possibility of co-

operation between many transmitters to one receiver and one transmitter 

to multiple receivers.

Remote control transmitter RS-P4 cooperate with dedicated pro-

duction units F&F: monostable receiver RS-407M monostable and 

bistable receiver RS-407B.

The impulse caused by the push of a button on the remote control to send 

a coded signal to the receiver. Remote control is protected against break 

transmission after releasing the button. Thanks to this, even the shortest 

activation function is the full frame of data transmissions. Data transmis-

sion from the remote control is indicated by flashing of red LED on the 

remote.

Programming guide (pairing the transmitter and receiver) is atta-

ched with the receiver RS-407M and RS-407B.

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collection, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Reviews: