background image

- 1 -

LE-03

Electric energy meter,

3-phase

The LE-03 is a static (electronic) calibrated electricity meter of 

three-phase alternating current in a direct system. 

A special electronic system under the influence of flowing cu-

rrent and applied voltage in each phase generates pulses pro-

portional to the energy drawn in the respective phase. Energy 

consumption in the phase is indicated by a flashing of corre-

sponding LED (L1, L2, L3). The sum of the three phase pulses is 

indicated by a flashing LED and converted into energy absorbed 

throughout the three-phase system. Its value is displayed by the 

mechanical drum abacus.

The last, red number on the drum abacus indicates row 1/10 

kWh (100 Wh).

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for LE-03









Reviews: