F&F LE-03-FPV-RST Manual Download Page 1

- 1 -

LE-03-FPV-RST

Electricity 

consumption meter, 

3-phase, resetable

MID  Directive 

2014/32/EU

Certificate    

0120/SGS0670

The LE-03-FPV-RST meter is an electronic, legalised (MID declara-

tion), 3-phase, 4-wire electricity meter for direct metering.

The meter is capable of measuring both active energy consumed 

and energy given up, making it ideal for monitoring energy pro-

duction and consumption in photovoltaic installations. 

The LE-03-FPV-RST is also equipped with an additional erasable 

energy meter, facilitating direct observation of the increase in 

energy since the previous meter reset, and an illuminated re-

ading field.

Compliance

Purpose

F&F Filipowski L.P.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge and can 

give any amount to up to that end point of collec� on, as well as to store the occasion of 

the purchase of new equipment (in accordance with the principle of old-for-new, regard-

less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the 

environment and human health.

Summary of Contents for LE-03-FPV-RST













Reviews: