background image

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, Poland    

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device to thrash with other unsorted waste! 

In accordan-

ce with the Waste Electrical and Electronic Equipment Act any household electro-wa-

ste  can be turned in free of charge and in any quantity to a collection point established 

for this purpose, as well as to the store in the event of purchasing new equipment (as 

per the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-

doned in the bosom of nature pose a threat to the environment and human health.

Wireless system

- 1 -

Description of the system

F&Wave is a family of wireless devices controlled by radio with a range of up to 100 

meters*. The receivers are available in either a DIN-rail mounting version (housing 1S) 

or a Ø60 flush-mounted version. The transmitters are available as handheld remo-

te controllers or as a flush-mounted version. The receivers relay control signals. The 

device that receives a control signal from the transmitter will automatically send it 

forward, which allows to increase the range of the remote control. 

* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of 

interference sources (power lines, transmitters, etc.) the actual range may be smaller.

FW-WS2

Radio wall switch 

2-button

Summary of Contents for FW-WS1







Reviews: