- 1 -
DMA-3 CT TrueRMS
Current intensity indicator,
3-phase
The DMA-3 CT is a 3-phase current intensity indicator, adapted
for measurement in an indirect circuit using current transfor-
mers with an output current of 5 A.
The sensor correctly measures the true rms value of the
current (TrueRMS), even in the case of a distorted (de-
formed) current waveform.
The indicator continuously measures the RMS current value, the
result of which is shown on a 3-row, 3-digit segment display on
the facade of the unit.
The indicator allows the value of connected current transfor-
mers to be set, so that the value shown on the display corre-
sponds to the actual current value.
The DMA-3 CT is suitable for mounting in a switchgear directly
on a 35 mm DIN rail.
Purpose
Functioning
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: [email protected]
Do not dispose of this device in the trash along with other waste!
According to the
Law on Waste, electro coming from households free of charge and can give any amo-
unt to up to that end point of collec� on, as well as to store the occasion of the purchase
of new equipment (in accordance with the principle of old-for-new, regardless of brand).
Electro thrown in the trash or abandoned in nature, pose a threat to the environment
and human health.
Summary of Contents for DMA-3 CT TrueRMS
Page 4: ...4 Wiring diagram...
Page 8: ......
