background image

- 1 -

AZH-MINI-LED

Twilight switch,

hermetically sealed

The AZH-MINI-LED is a twilight switch with a built-in light sensor, 

enclosed in a hermetically sealed housing and specially adapted 

to switch on the LED lighting. By using a switching element that 

guarantees correct operation with current pulses up to 120 A/ 

20 s, the AZH-MINI-LED automatic switch successfully manages 

to switch on and off the LED lighting, which, despite its energy 

efficiency generates at the moment of switching strong current 

surges that effectively destroy classic relays.

The twilight switch should be placed in a place with constant ac-

cess to natural daylight. Changes in its intensity will cause the li-

ghting to switch on and off. The time of switching on the lighting 

can be set by the user using the knob located inside the device. 

Turning the knob towards the "moon" will switch the lighting on 

later, turning the knob towards the "sun" will switch it on earlier.

Purpose

Functioning

F&F Filipowski sp. j.

Konstantynowska 79/81, 95-200 Pabianice, POLAND

phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71

www.fif.com.pl; e-mail: [email protected]

Do not dispose of this device in the trash along with other waste! 

According to the Law on Waste, electro coming from households free of charge 

and can give any amount to up to that end point of collec� on, as well as to sto-

re the occasion of the purchase of new equipment (in accordance with the prin-

ciple of old-for-new, regardless of brand). Electro thrown in the trash or abando-

ned in nature, pose a threat to the environment and human health.

Summary of Contents for AZH-MINI-LED







Reviews: