Lumina 35
Inputs and outputs
52
Analog inputs have the following settings:
Input address
The address of the analog input.
Type
Readout of the type of measurement being carried out:
•
NONE
•
TEMPERATURE
•
PRESSURE Pa
•
CO2 5000 PP
•
LINEAR (U)
•
LINEAR (R)
•
POLYNOM (U)
•
LUX (R)
Measurement
The measured signal (if changed manually, the correction value is adjusted
accordingly).
Correction
Readout of the correction of the measurement (this value can only be reset).
Digital inputs have the following settings:
Input address
The address of the analog input.
Type
Setting of the type of measurement being carried out.
•
NONE
•
LEVEL
•
COUNT
•
FREQ
•
DSR feedback
Analog outputs have the following settings:
Output address
The address of the output.
Type of channel
Shows the type of analog output.
Channel function
Setting of the type of analog control (
0
– 10V
/
10
– 0V
).
Correction factor
Factor to determine the adjustment of the setpoint. This damps the effect of the control.
Repeat time
The minimum time between two adjustments in the control by the computer control. This
setting means the control computer will not change the degree of control too quickly.
Summary of Contents for Lumina 35
Page 1: ...g...
