Lumina 35
Installer
46
INSTALLER
→
CLOCKS
→
LIGHT
→
tab page
Control
Control on
*
Setting of the way in which light is controlled. This option is only available if
light
measurement=YES
has been selected at light clocks.
•
LUX
: If you want to control the light using a light sensor, select
LUX
. The light
clock will adjust the light intensity to the measured light intensity.
•
PERC
: If the lighting is not to be controlled using the connected sensor, select
PERC
. The data from the light sensor will only be used for readout purposes.
Light input
*
Setting of the input address (analog input) to which the light sensor used is
connected.
This option is only available if on
HOUSE SETUP
→
tab page
Clocks
option
light
measurement=YES
was selected.
Light output
Setting of the analog output address used to control the light intensity in percentages.
Analog type
Setting indicating the analog control type
Reaction speed
*
Setting of the reaction speed of the light sensor that controls light intensity if the
measured light level changes (
FAST
,
NORMAL
or
SLOW
).
Relay off below
Setting of the threshold value below which the relay output deactivates the lighting if
control is based on a percentage (
Dim
). This prevents an insufficient reaction from
the lighting below a certain percentage (flickering).
The control computer can register digital inputs. These registration inputs can be used to register units (for
example water).
The unit is registered in the form of pulse values (counts) or contact. The control computer adds up the number of
counts or measures the active time and converts the time into a measured unit.
INSTALLER
→
REGISTRATION
Description
Setting of the name of the function.
Summary of Contents for Lumina 35
Page 1: ...g...
