Fancom IVM-TOUCH, Manual, Page: 9 / 30

G
6
g
Each connected IVM-Touch has a unique address for the I/O-network. Set the I/O-address as follows:
1. Enter the Installation menu (see "Working with the IVM-Touch" page 13).
2. Scroll down to the I/O-address menu.
3. Tap the number to edit the value.
4. Set the required I/O-address by using .
5. Tap to confirm.
If the IVM-Touch is the first or last unit of the IO-net, switch the Termination resistor dipswitch on
the ICM board to ON.
Set the ventilation control type as follows:
1. Enter the Installation menu (see "Working with the IVM-Touch" page 13).
2. Scroll down to the Control type menu.
3. Tap the setting to edit the value.