Fancom IVM-TOUCH, Manual

Page: 15 / 30

G
12
g
Set the dipswitch settings on Triac 2T10 board
When you have a configuration with two triacs (see "Appendix: Connection diagram TRIAC 2T10A" page 26),
choose whether you want dependent or independent control.

Depended: both fans are controlled simultaneous.

Independed: each fan is controlled seperate (controllable via I/O-net).
Set the dipswitches for dependend / independed as follows:
Board 1 Board 2
Control type Triac Bypass Triac Bypass
Dependend 1 1 1 1
Independend 1 1 2 2
1. Check whether the IVM-Touch has been connected correctly.
2. Check whether the IVM-Touch works optimally.