Gn
2
g
Before installing and commissioning the iM.60, read the safety instructions, provisions and conditions carefully.
This paragraph contains a number of general safety instructions. The installation of the device and remedying of
any malfunctions should be performed by a certified electrical installer according to the applicable norms. The
guarantee does not apply if this product is installed in any other way than is indicated by Fancom and if the
product's motor has been opened and changes have been made to the product.
Disconnect power before installation.
Prevent electrostatic discharge (ESD) when working on the iM.60. Ensure that the workplace is clean
and dry.
Use correct wires as shown in the connection diagrams.
Make all wiring connections and check them before applying power. Incorrect connections can cause
permanent damage.
Never place the iM.60 in a place where the weather has direct influence (not in the sun, not in places
where the temperature can rise sharply etc.).
Inspect the iM.60 periodically for any damages. Notify your installation technician immediately of any
damages. A damaged iM.60 is unsafe!
It is advisable not to switch off the iM.60. This could lead to condensation caused by cooling down.
Do not touch any of the iM.60 moving parts.
