background image

The “Summer / Winter” reverse function is included in the remote control or wall control to make the fan 

rotate in an anti-clockwise direction during summer. In winter, this can be reversed, so that the blades now 

move in a clockwise direction. 

•  Periodic cleaning of your ceiling fan is the only maintenance required.  

•  Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you do so. 

•  Do not use water when cleaning your ceiling fan. It could damage the motor or the paint finish on the 

blades and create the possibility of an electrical shock.  

•  The motor has a permanently lubricated ball bearing and as such, is maintenance free.

NOISE: 

The manufacturer warranty covers actual faults that may develop, but NOT minor complaints, e.g. motor 

operation noise - ALL ELECTRIC MOTORS ARE AUDIBLE TO SOME EXTENT; this is more obvious when the fan is 

operating at low speeds. 

WOBBLE: 

•  Ceiling fans are designed to move during operation because they are not generally rigidly mounted  

•  Movement of a couple of centimetres is acceptable for safe operation. 

•  Balancing kits included should be used to adjust the balancing when first installed.  

 

NORMAL WEAR AND TEAR: 

Threaded components working slighting loose or blade carriers even slightly bent due to vigorous cleaning 

or bumping can cause extra wobble and noise. THIS IS NOT COVERED UNDER WARRANTY but a little care and 

maintenance can reduce or prevent this problem. 

REVERSE FUNCTION

CARE & CLEANING

Summary of Contents for CFFCHZ4WHW

















Reviews: