INSTALLATION STEPS
1. Install the blades on the motor housing
1.1. Unscrew screws from Motor (9 in total)
1.2. Align the blade with the screw holes on the motor housing & secure with the screws removed in
step 1.1
1.3. Tighten all the blade screws securely and evenly.
2. Install Motor Housing
2.1. Remove 3 Screws from flat ring at the top of the downrod connected to the motor
2.2. Remove 2 screws that are holding downrod
2.3. Place motor housing over motor with wire threaded through hole
2.4. Secure motor housing using the 3 screws to screw to the ring removed in 2.1
1.1
2.1
2.2
2.3
1.2
Summary of Contents for CFFCHZ4WHW
Page 16: ...WWW FANCO COM AU...
