Fanco CFFCHZ4WHW, Installation Manual

Page: 13 / 16

TECHNICAL DATA
TROUBLESHOOTING
TROUBLE
Fan will not start
Fan wobbles
Fan sounds noisy
Mechanical noise
MODEL NO.
CFFCHZ4WHW
CFFCHZ4WHR
CFFCHZ4BRW
CFFCHZ4BRR
CFFCHZ3WHW
CFFCHZ3WHR
CFFCHZ3BRW
CFFCHZ3BRR
CURRENT
0.28 A
0.28 A
0.28 A
0.28 A
0.28 A
0.28 A
0.28 A
0.28 A
RATED VOLTAGE
220-240v
220-240v
220-240v
220-240v
220-240v
220-240v
220-240v
220-240v
LIGHT POWER
12W (Light Kit)
12W (Light Kit)
12W (Light Kit)
12W (Light Kit)
12W (Light Kit)
12W (Light Kit)
12W (Light Kit)
12W (Light Kit)
DC MOTOR POWER
35W
35W
35W
35W
35W
35W
35W
35W
DIMMABLE
N / A
N / A
N / A
N / A
N / A
N / A
N / A
N / A
POSSIBLE CAUSE
A) Fuse blown or circuit breaker tripped
B) Loose wire connections or plug to
fan / controller
C) Battery flat in remote control
A) Fan blades are not horizontal to the ceiling
B) Blade screws are loose
C) Blades are not balanced enough
A) Loose fan blades
B) Ceiling fan not secured against ceiling
A) Fan has not settled in fully
SUGGESTED REMEDY
A) Check fuses and circuit breakers
B) Check wire connections and ensure plugs are
positively connected
C) Replace 12V battery in remote control
A) Retighten all screws on blades*
B) Make sure all screws are tightened
C) Use provided balancing kit to balance blades
A) Retighten all screws on blades.
B) Retighten screws on the mounting bracket
A) Allow at least 8hrs of use for the fan to settle in
*DO NOT make any adjustments by applying pressure up or down on blades
CLFCHZLED