2. Erase the transmitter codes stored in the Wall control memory
The ceiling fan receiver may be holding multiple wall control/transmitter codes in its memory. Assuming the steps
outlined above in (1) have been tried and correctly followed, there could still be a situation where Wall control B is con-
trolling both Fan A and Fan B, while Wall control A only controls Fan A.
This might be because Receiver A (installed in Fan A) still “remembers” Wall control B, despite the re pairing process
having been completed with Wall control A.
When pairing the wall control with the receiver for the very first time you generally only need to press and hold the fan
ON/OFF button for 5 seconds before it responds. This is the correct procedure to add a new wall control to a receiver BUT
it does not cause the receiver to “forget” previously paired wall controls. So you could in theory add several wall controls
to a receiver.
Pressing and holding the ON/OFF button for a longer period (e.g. 15 seconds) will:
a) wipe the receiver’s memory (removing any previously paired wall controls)
b) then add the pairing wall control to the receiver’s memory
This is typically the desired pairing behaviour required.
1. TO LOWER SPEED
2. TO INCREASE SPED
3. REVERSE DIRECTION (SUMMER/WINTER)
4. TIMER FOR FAN
5. ON/OFF LIGHT
6. NATURAL WIND
7. ON/OFF FAN
8. INDICATOR OF CURRENT SPEED
To operate CCT (Colour Changing Technology) function; Use Light On/Off button to turn light on. Turn light off and on
again immediately to change CCT setting, until desired CCT setting is found. There are 3 colour options; 3000K (Warm),
4000K (Natural) and 5000K (Cool).
DC WALL CONTROL SETTING AND OPERATION FOR DC FANS
FUNCTIONS OF WALL CONTROL TRANSMITTER
1
3
4
5
7
2
6
8
Summary of Contents for CFFCHZ4WHW
Page 16: ...WWW FANCO COM AU...
