If no QR code can be found on the body of the device, please choose the 'Others' to add the camera.
Method One:
1. Enter the APP, click the "+"on the top right corner, choose 'Others'
→
'IP Camera'.
2. Choose 'Wireless Installation', please refer to the 'Wireless configuration add instructions' and the APP's voice prompt to finish the setting.
Note: Please refer to the step 2/3/4 in the 'Scan QR code' above to finish the 'Wireless Installation' settings.
Note: During this process, if it prompt that wifi configured successfully but the binding page does not pop up, please return to the Add Camera
page,select the 'Search in LAN' or "Manually add" to bind the camera.
Method Two:
1. Please power on the camera, and use network cable to connect camera with the router LAN port, make sure the router yellow indicator is flashing;
then choose the " Search in LAN" or "Manually add" method in the 'Others' to add the camera.
Please make sure the phone and camera are under the same router.
